[. . . ] Operating Instructions
LCD Projector
Model No.
PT-AX200E
Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ0236-5
ENGLISH
Important Safety Notice
Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. You should note it in the space provided below and retain this booklet in case service is required.
Important Information
Model number: Serial number:
WARNING: WARNING:
PT-AX200E
THIS APPARATUS MUST BE EARTHED. [. . . ] The remote control may malfunction under strong light such as fluorescent. · If there are any obstacles between the remote control and the remote control signal receptor, the remote control may not operate correctly.
Basic Operation
Turning on the button backlight
In a dark room, you can turn on the button backlight to operate the remote control. Press the LIGHT button on the upper right corner of the unit to turn on the backlight and enter the light-on mode. After 5 seconds without any operation, the backlight will be faded, and it will go out after another 5 seconds. To escape from the light-on mode, press the LIGHT button.
Switching the preset settings
You can switch the preset settings by pressing the THEATER ROOM, LIVING ROOM, FAVORITE LOAD buttons. See "FAVOURITE LOAD" on page 32.
Recommended for viewing in dark room. NORMAL GAME DYNAMIC VIVID CINEMA
22 - ENGLISH
Remote control operation
Adjusting the image
You can display the PICTURE and ADVANCED MENU menu items by pressing the PIC. Press F G to select the required menu item and I H to adjust.
PICTURE menu items
PICTURE MODE, CONTRAST, BRIGHTNESS, COLOUR, TINT, SHARPNESS, COLOUR TEMPERATURE and DYNAMIC IRIS
NOTE:
· For each menu items description, see "PICTURE menu" on page 30. · The screen will be cleared after 7 seconds without any operation.
ADVANCED MENU items
GAMMA, CONTRAST, BRIGHTNESS, NR, MPEG NR, CINEMA REALITY and TV-SYSTEM
Switching the aspect ratio
The aspect ratio will be selected automatically, or you can switch it manually by pressing the ASPECT button. Press the button several times to cycle through the different aspect type as follows. See "ASPECT" on page 34.
VIDEO/S-VIDEO/COMPONENT (YPBPR)
4:3 16:9 14:9 ZOOM2 ZOOM1 JUST
NOTE:
· If you project an image with an unmatched aspect ratio, the image may distort or some portions may be cropped. Select an aspect ratio which preserves the intention of the image creator. · The order of aspect type is defined not only by the input method but also by the input signals. · If you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place, such as a restaurant or hotel, you might infringe on the copyright of the creator which is protected by copyright law.
COMPUTER (RGB)
4:3 V SCROLL 16:9
HDMI
4:3 16:9
Resetting to the factory default settings
You can reset most of the customised settings to the factory defaults by pressing DEFAULT button of the remote control. Display the required sub-menu or the menu items and press the button again.
NOTE:
· Some menu items are not available to reset by pressing the DEFAULT button. Adjust each menu items manually.
Capturing an image
When projecting an image, press FREEZE button to capture the projected image and display it on the screen as a still picture. Press again to escape.
ENGLISH - 23
Basic Operation
Remote control operation
Setting your own colour profile
You can adjust a selected colour individually and save and retrieve under the PICTURE MODE setting. Select a menu item and the I H to adjust each item level.
The result box is displayed on the right of the cursor and shows the adjusted colour.
CURSOR RETURN SELECT ENTER DEFAULT COLOUR TINT BRIGHTNESS
PROFILE NORMAL CURSOR LOG PROFILE SAVE PROFILE DELETE PROFILE NAME CHANGE
Adjusting the selected colour
Select a colour and adjust COLOUR, TINT and BRIGHTNESS. Select the CURSOR menu and press ENTER.
The projected image is captured, and the target cursor is displayed. When the LOG is fully stored, the target cursor will not be displayed. Target cursor
Adjusted colour
Adjust the vividness of the colour. Press ENTER to store the adjusted result.
"PROCESSING" is displayed for a few seconds and the result is stored in LOG. [. . . ] 14 Security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SERIAL Basic format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]